null

Honda Talon 1000X 6" Portal Gear Lift

  • $3,389.95
SKU:
PGH6-3-82-3#
Shipping:
Free Shipping
CATEGORIES:
PORTAL GEAR LIFTS

FITMENT:

  • Honda Talon 1000X (2019+)
  • Honda Talon 1000X-4 (2020+)

FEATURES:

  • Available with billet or cast aluminum housings
  • Cool, quiet, precision-ground gears made from 9310 alloy billet steel
  • 1.5 in. diameter 4340 hardened steel driveshaft
  • Housings use Thermo-Tork® gaskets that don’t let anything through
  • Universal hub fits all major bolt patterns
  • Gear reduction reduces stress on your drivetrain
  • Weighs 224 lb. total, which is 25+ lb. lighter than the competition

Wheel Requirements:

  • 18” or larger wheel required
  • 18” wheels cannot exceed 4-1/2” backspacing
  • 20” and larger wheels cannot exceed 5” backspacing
Honda Talon 1000X Portal Gear Reduction Recommendations
Max Tire Size Required Suspension Setup with 6” Portals Recommended 6” Gear Reduction
Up to 33" Stock 30%
Up to 33" 2" Lift Kit 30%
34" to 36"               1.5" Forward Offset A-Arms 45%
34" to 36" 1.5" Forward Offset A-Arms and 2" Lift Kit 45%
Gear reductions listed are general guidelines to maintain factory top speed. Installing a larger than recommened gear reduction will result in extra torque and lower top speed.

Everyone knows there’s no such thing as a “one size fits all” off-road experience. It all comes down to where, when, and how you like to ride. That’s why SuperATV’s Gen 3 portals are all about giving you options. When you buy our 6” Portal Gear Lift for your Honda Talon 1000X, you get a say in what kind of housings we use (cast or billet aluminum) and how much gear reduction you get. If you’re the kind of rider who likes to push your machine to its limits in terms of power and tire size, a 45% gear reduction is right up your alley. If you’re looking to increase your cornering abilities on the trail, go with a 30% gear reduction. 

GDP—the Most Trusted Name in Portals
When you add a set of GDP portals to your machine, you’re joining thousands of other riders who experience the strength and reliability of this product every time they get behind the wheel. More side-by-side enthusiasts turn to SuperATV for portals over any other brand, and there’s a reason for that. Our portals are the most trusted, tested, and proven, hands down.

Perfect for Mud
Mud and portals go together like peanut butter and jelly. With GDP portals, your 1000X has the room for bigger tires and the torque boost needed to run them. You’ll be able to cut through the thickest, sloppiest mud with ease, and the 6” lift will keep you from getting swamped. You’ll never approach mud the same way again.

A Gear Reduction That Protects Your Drivetrain
By putting the gear reduction in the hub, our portals don’t put any extra stress on your machine’s drivetrain. This means your axles, differential, prop shaft, and transmission are able to do their job without acquiring any premature wear and tear. Being able to ride without worry lets you focus on what’s really important—having fun.

Unmatched Gear Material
Your portals are only as strong as the gears inside of them, so we made ours as smart and strong as humanly possible. These top-of-the-line gears are made using 9310 alloy steel, which is insanely strong. We also precision grind them to ensure that they mate perfectly with every revolution. Long story short, these gears deliver a super smooth and quiet performance, no matter how you ride.

Stronger Housings by Design
We went all out when designing our portal housings, because we know how important it is for them to be stronger, smarter, and more reliable than anything else out there. And what’s more, you get options—choose from cast or USA-made, CNC-machined 6061 billet aluminum. Whichever you choose, you’re getting housings that are second to none.

  • Our housings are reinforced in all the right places
  • They’re built with better oil flow and gearing forces in mind
  • There are no gimmicks and no vents because vents do more harm than good—we know because we tested them

The Strongest Portal Backing Plates You Can Get
We make our portal backing plates using an advanced steel alloy that’s specialized for ultra-high force applications, so you know it’s tough enough to put up with your level of trail abuse. At 5/16” thick and with a metal that’s even stronger than chromoly, these backing plates are guaranteed to perform for years on end.

Advanced Gaskets and Seals
Whether you go with cast or billet, both housings use:

  • Advanced Thermo-Tork® gaskets with excellent oil resistance and a lower deterioration rate than Kevlar gaskets
  • A sealed input gear and double-lipped output seal
  • 100% sealing coverage throughout so you can forget about oil leaks

Bearings That Rock
Your bearings can make or break your portals' performance. Just like everything else that goes into GDP portals, our bearings are designed with expertise and care. We use roller bearings to hold our idler gear because we don’t compromise when it comes to strength. Our output bearing is a double-angular contact bearing, which can handle huge loads in all directions without showing premature wear. These bearings truly are built for battle.

Universal Hubs and Slotted Rotors
GDP portals come with precision-ground, stainless steel slotted rotors that stay cool and give you the braking power you need, when you need it. Our portals also come with universal hubs that have 4/156, 4/137, 4/115, and 4/110 bolt patterns and lugs. This means you’ll be able to run nearly any side-by-side wheel under the sun! We also invented the tapered output shaft that attaches to the hubs. It gives you a more secure lock that keeps your hubs from wobbling or wearing over time.

6” Portal Gear Lift Includes:
(4) Assembled portal hub boxes complete with 9310 gears, seals, output shaft, Thermo-Tork® gaskets, and thrust bearings
(4) Universal hubs and precision-ground stainless steel slotted rotors with lugs
(4) Specialized steel alloy backing plates
(4) Steel caliper mounting plates with spacers 
(2) Steel steering arms
Extended brake lines
All required hardware, including recessed castle nut socket

RETURN POLICY

  • Items must be returned within 30 days of receiving them
  • Windshields with the protective covering removed are not returnable
  • Special ordered & custom items are non-returnable
  • All return expenses are the responsibility of the customer unless the incorrect part was shipped in error
  • Exchanges will not be shipped until the return has been received
  • A restock fee may be applicable depending on the situation/manufacturer
  • RE-STOCK FEES below are the MINIMUM manufacturer charges deducted from your refund
  • The Original shipping cost will be applied to any returned order that received free shipping when the order was placed
  • All items must be returned in new/undamaged/uninstalled condition in original packaging
  • All returns must be inspected by our team before a refund/exchange will be processed
  • Returned items that do not meet these requirements may be denied a refund/exchange

-We ask for your year, make and model at the end of you order. We are not required to check fitment on the products that you selected. It is ultimately the customers responsibility to check fitment on all products they are ordering to make sure it will fit their vehicle. Fitment information (Year, Make and Model) are listed on each product page, if you are not sure you are always more than welcome to give us a call and speak to someone in our sales department. 

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (5 to 10 business days), and the time it takes your bank to process our refund request (24 to 48 hours). 

 

utv-direct-return.png

 

 If you need to return an item(s)  please CLICK HERE FOR THE RETURN REQUEST FORM.

***Return Authorization emails are sent to customer within 2 business days. Remember to check ALL EMAIL FOLDERS after 48 hours as they do not always go into your inbox, if you still do not see it please give us a call***

California Prop 65 Warning

WARNING: Products on this website may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Details

Categories

About Us

Brands

Blog

My Account

Sign in

or Create an account