Free Shipping
INCLUDES:
- (1) Drivers Side Blade
- (1) Passengers Side Blade
- (1) Center Pivot Bulkhead
- (1) UTV Pro 2.0 Push Tube
- (1) Vehicle Specific Mount (make sure to select your correct vehicle above)
KFI Pro-V Snow Plow System Specifications:
- 80" Wide when straight
- 75" wide in v-shape
- 72" wide in scoop
- 21" vertical blade face height with an approximate 28" height with snow flap
- 4" integrated height adjustment (=1" to +3" in 1" increments)
- Steel frame design with replaceable poly face
- Dual curvature face for supreme snow moving
- Heavy duty 3" diameter, Grade-50 steel skid plates with bolt-on brackets
- Tripping wear bar
- Metal bead blasted, then powder coated black for supreme durability
- Weighs approximately 260 lbs (100-200 lbs than the competition)
- Made in the USA
- 2-Year Limited Warranty
- Complete installation instructions included
- All mounting hardware included
- Powdercoated for maximum durability
- Unlike all other Plow competitors, our components are metal bead blasted before they are powder coated for the best possible finish prep.
- 100% Made in the USA
KFI Pro 2.0 UTV Push Tube (106300):
- Improved Manufacturing
- Easier Install for All Plow Accessories
- Added 2.5" Of Overall Length
- Works With All KFI Plows
- Front Mount Design with 30"+ of lift height
- Heavy Duty 1-1/2" 12 Gage Square Steel Tubing
- Heavy Duty 1/4" Thick 1-1/2" Diameter Grade 50 Pivot Bushings
- 6" Diameter POM Injection Molded Rotator Bushing
- Easy-Pull Pin Blade angle adjustment
- Multi-position Plow Lift Bracket
- 6 five-degree blade pitch adjustments
- 3 blade angle positions that rotate the blade up to 25 Degrees
KFI Model Plow Mount:
- Front-Mount System
- Plate constructed from 3/16" Grade 50 Steel
- All Pin Tabs are constructed from 1/4" Thick Grade 50 Steel
- All Plow tabs are tapered to help reduce hang-ups while trail riding
** Actual Plow Mount may look different than reference photo shown **
Leveling Kit Option:
-
Stock machines will not require a leveling kit even on models such as KRX 1000, RMAX or RZR Pro XP.
-
Machines with High Arch A-Arms, Large Tires, Lift Kits or Tracks will most likely require a leveling kit. The optimal pin height is 10 7/8" from the ground to the center of the plow mount pin hole. The Pro-V Snow Plow System can be adjusted between -1" and +3" in 1" increments without a leveling kit. A leveling kit can be used to bring the plow system closer to its stock height if desired.
-
Optimal pin height is 10 7/8" from the ground of the plow mount pin hole
-
Machines with tracks put on them require a Pro-V Track Extension (106280) to push the blade further forward. If Hydraulic Actuators are used, 2 Actuator Harness Extensions are required (ACT-EXT x2)
Kit 1: Pro-V Snow Plow System with Manual Angle Adjustment:
-
Components Include Drivers side and passengers side wings
- Center pivot bulkhead
- UTV Pro 2.0 Push Tube
- Manual Angle Kit
- Includes Standard Mounting Ears
- Includes Premium Plow Markers
- Includes Top Flap Kit
Kit 2: Pro-V Snow Plow System with Hydraulic Actuators and Dash Rocker Switch Kit:
-
Components Includes Drivers side and passengers side wings
- Center pivot bulkhead
- UTV Pro 2.0 Push Tube
- (2x) Hydraulic Actuators (ACT-203)
- (2x) Actuator Harness Kits with Dash Rocker Switch
- Includes Standard Mounting Ears
- Includes Premium Plow Markers
- Includes Top Flap Kit
Kit 3: Pro-V Snow Plow System with Hydraulic Actuators and Hand Remote Kit:
-
Components Includes Drivers side and passengers side wings
- Center pivot bulkhead
- UTV Pro 2.0 Push Tube
- (2x) Hydraulic Actuators (ACT-203)
- Actuator Harness Kit with Hand Remote (Operates Actuator and also Winch)
- Includes Standard Mounting Ears
- Includes Premium Plow Markers
- Includes Top Flap Kit
RETURN POLICY
- Items must be returned within 30 days of receiving them
- Windshields with the protective covering removed are not returnable
- Special ordered & custom items are non-returnable
- All return expenses are the responsibility of the customer unless the incorrect part was shipped in error
- Exchanges will not be shipped until the return has been received
- A restock fee may be applicable depending on the situation/manufacturer
- RE-STOCK FEES below are the MINIMUM manufacturer charges deducted from your refund
- The Original shipping cost will be applied to any returned order that received free shipping when the order was placed
- All items must be returned in new/undamaged/uninstalled condition in original packaging
- All returns must be inspected by our team before a refund/exchange will be processed
- Returned items that do not meet these requirements may be denied a refund/exchange
-We ask for your year, make and model at the end of you order. We are not required to check fitment on the products that you selected. It is ultimately the customers responsibility to check fitment on all products they are ordering to make sure it will fit their vehicle. Fitment information (Year, Make and Model) are listed on each product page, if you are not sure you are always more than welcome to give us a call and speak to someone in our sales department.
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (5 to 10 business days), and the time it takes your bank to process our refund request (24 to 48 hours).
If you need to return an item(s) please CLICK HERE FOR THE RETURN REQUEST FORM.
***Return Authorization emails are sent to customer within 2 business days. Remember to check ALL EMAIL FOLDERS after 48 hours as they do not always go into your inbox, if you still do not see it please give us a call***
