NOTE - This plow setup is heavier than standard KFI - may not be best suited for Mid-size or smaller UTV models

INCLUDES:

(1) Drivers Side Blade
(1) Passengers Side Blade
(1) Center Pivot Bulkhead
(1) UTV Pro 2.0 Push Tube
(1) Vehicle Specific Mount (make sure to select your correct vehicle above)

KFI Pro-V Snow Plow System Specifications:

80" Wide when straight
75" wide in v-shape
72" wide in scoop
21" vertical blade face height with an approximate 28" height with snow flap
4" integrated height adjustment (=1" to +3" in 1" increments)
Steel frame design with replaceable poly face
Dual curvature face for supreme snow moving
Heavy duty 3" diameter, Grade-50 steel skid plates with bolt-on brackets
Tripping wear bar
Metal bead blasted, then powder coated black for supreme durability
Weighs approximately 260 lbs (100-200 lbs than the competition)
Made in the USA
2-Year Limited Warranty
Complete installation instructions included
All mounting hardware included
Powdercoated for maximum durability
Unlike all other Plow competitors, our components are metal bead blasted before they are powder coated for the best possible finish prep.
100% Made in the USA

KFI Pro 2.0 UTV Push Tube (106300):

Improved Manufacturing
Easier Install for All Plow Accessories
Added 2.5" Of Overall Length
Works With All KFI Plows
Front Mount Design with 30"+ of lift height
Heavy Duty 1-1/2" 12 Gage Square Steel Tubing
Heavy Duty 1/4" Thick 1-1/2" Diameter Grade 50 Pivot Bushings
6" Diameter POM Injection Molded Rotator Bushing
Easy-Pull Pin Blade angle adjustment
Multi-position Plow Lift Bracket
6 five-degree blade pitch adjustments
3 blade angle positions that rotate the blade up to 25 Degrees

KFI Model Plow Mount:

Front-Mount System
Plate constructed from 3/16" Grade 50 Steel
All Pin Tabs are constructed from 1/4" Thick Grade 50 Steel
All Plow tabs are tapered to help reduce hang-ups while trail riding

** Actual Plow Mount may look different than reference photo shown **

Leveling Kit Option:

Stock machines will not require a leveling kit even on models such as KRX 1000, RMAX or RZR Pro XP.
Machines with High Arch A-Arms, Large Tires, Lift Kits or Tracks will most likely require a leveling kit. The optimal pin height is 10 7/8" from the ground to the center of the plow mount pin hole. The Pro-V Snow Plow System can be adjusted between -1" and +3" in 1" increments without a leveling kit. A leveling kit can be used to bring the plow system closer to its stock height if desired.

Optimal pin height is 10 7/8" from the ground of the plow mount pin hole
Machines with tracks put on them require a Pro-V Track Extension (106280) to push the blade further forward. If Hydraulic Actuators are used, 2 Actuator Harness Extensions are required (ACT-EXT x2)

Kit 1: Pro-V Snow Plow System with Manual Angle Adjustment:

Components Include Drivers side and passengers side wings
Center pivot bulkhead
UTV Pro 2.0 Push Tube
Manual Angle Kit
Includes Standard Mounting Ears
Includes Premium Plow Markers
Includes Top Flap Kit

Kit 2: Pro-V Snow Plow System with Hydraulic Actuators and Dash Rocker Switch Kit:

Components Includes Drivers side and passengers side wings
Center pivot bulkhead
UTV Pro 2.0 Push Tube
(2x) Hydraulic Actuators (ACT-203)
(2x) Actuator Harness Kits with Dash Rocker Switch
Includes Standard Mounting Ears
Includes Premium Plow Markers
Includes Top Flap Kit

Kit 3: Pro-V Snow Plow System with Hydraulic Actuators and Hand Remote Kit:

Components Includes Drivers side and passengers side wings
Center pivot bulkhead
UTV Pro 2.0 Push Tube
(2x) Hydraulic Actuators (ACT-203)
Actuator Harness Kit with Hand Remote (Operates Actuator and also Winch)
Includes Standard Mounting Ears
Includes Premium Plow Markers
Includes Top Flap Kit

UTV Direct Return Policy

Eligible items may be returned within 30 days of receiving your order. All returns must be submitted through the UTV Returns Center and are subject to inspection before a refund or exchange is processed.

Items must be returned within 30 days of receiving them.
Items must be returned in new, undamaged, uninstalled condition and in the original packaging.
Windshields with the protective covering removed are not returnable.
Special-order and custom items are non-returnable.
Return shipping expenses are the responsibility of the customer unless UTV Direct shipped the incorrect item in error.
Exchanges will not be shipped until the return has been received and inspected.
The original shipping cost may be deducted from any returned order that received free or shared shipping when the order was placed.
Returned items that do not meet return requirements may be denied a refund or exchange.

Restocking fees: A restocking fee may apply depending on the item condition, situation, or manufacturer. The restocking fees below are the minimum manufacturer charges deducted from your refund when applicable.

Before returning an item: Please submit a return request and wait for return instructions. Do not ship items back without return authorization.

During checkout, we ask for your year, make, and model. UTV Direct is not required to verify fitment on the products selected. It is ultimately the customer’s responsibility to confirm that the products ordered are correct for their vehicle. Fitment information is listed on each product page. If you are unsure, please contact our sales team before placing your order.

Refund timing may vary. You should generally expect to receive your refund within four weeks of giving your package to the return shipper, although many refunds are completed more quickly. This time period includes return transit time, inspection/processing time, and bank/payment processing time.

Start a Return Request

Check Return Status

View Full Shipping & Returns Policy

Return authorization emails are typically sent within 2 business days. Please check all email folders, including spam and promotions folders.