Free ShippingFITMENT:
- Honda Pioneer 1000 : 2016+
- Honda Pioneer 1000-5 : 2016+
- Honda Pioneer 1000 Deluxe : 2016+
- Honda Pioneer 1000-5 Deluxe : 2016+
- Honda Pioneer 1000 Limited Edition : 2017+
- Honda Pioneer 1000-5 Limited Edition : 2017+
- Honda Pioneer 1000-6 : 2023+
NOTE:
- Pioneer 1000 or Pioneer 1000-5 Limited Edition Models will require Rhino 2.0 axles
- You may need wheel spacers when running 12” wheels
- If you want to run offset A-arms with our 3" Lift Kit, you must have Rhino Brand Axles. Stock axles will bind
- Does not fit Trail models if using a lift kit
- A-Arms with Keller ball joints will not work with a Portal gear lift
FEATURES:
- Adds a 1.5” forward offset
- Fit up to 31” tires
- Made with 1.5” diameter tubing
- 0.5” larger than stock
- 0.25” larger than our standard High-Clearance 1.5” Forward Offset A-Arms
- Adjustable lower pivot blocks for full camber adjustability
- Utilizes stock A-arm bushings
- UV-resistant powder coat finish
- Easy to install
- Backed by a lifetime warranty
Dominate with Atlas Pro A-Arms
There it is—the rough, rocky slope none of your buddies can conquer. Before they know what hit them, they’re eating your dust on your way to the top because you're equipped with SuperATV’s Honda Pioneer 1000 Atlas Pro 1.5" Forward Offset A-Arms. These rugged A-arms provide extra ground clearance, stability, and room for new 31” tires on your Pioneer to help you over boulders that hold stock machines back. With these bad boys, you’ll never back down from a hill again.
Bigger and Stronger Than Stock
Atlas Pro A-arms are an upgrade in every way. They’re 0.5” larger than stock and 0.25” larger than our standard high-clearance A-arms. They’re super durable thanks to a UV-resistant powder coating, meaning they’re immune to rust. The larger construction is eye-catching, adding an intimidation factor to your Pioneer. These A-arms ooze confidence and power. You’ll take on the wildest trails with the Atlas Pros easily and make it look good too.
No Hang-Ups with Higher Clearance
These Atlas Pro A-Arms give you an additional 1.5” of ground clearance to keep you from getting stuck. Your wheelbase is also extended, giving you more stability. Additionally, the offset allows you to run 31” tires on your Pioneer without a lift. Obstacles you may have avoided in the past out of fear of hang-ups or losing balance will become bumps in the road with these control arms.
Correct Camber Saves Your Tires
Atlas Pro A-Arms come with fully adjustable pivot blocks. They’re set to factory standards for the fastest installation possible. If you’ve made upgrades to your machine, you can save your tires from unnecessary wear and tear by adjusting your camber. No matter what adjustments you’ve made to your side-by-side, these arms are a perfect addition.
Let SuperATV Do the Work—Preassembly Available!
Want to spend more time on the trails and less time in the garage? Purchase a set of SuperATV ball joints with your A-arms and we’ll install them for you for free! We save you money and time so you can get back to doing what you love.
NOTE: You must re-use your stock ball joints if you don’t select a pre-installed ball joint at checkout.
UTV Direct Return Policy
Eligible items may be returned within 30 days of receiving your order. All returns must be submitted through the UTV Returns Center and are subject to inspection before a refund or exchange is processed.
- Items must be returned within 30 days of receiving them.
- Items must be returned in new, undamaged, uninstalled condition and in the original packaging.
- Windshields with the protective covering removed are not returnable.
- Special-order and custom items are non-returnable.
- Return shipping expenses are the responsibility of the customer unless UTV Direct shipped the incorrect item in error.
- Exchanges will not be shipped until the return has been received and inspected.
- The original shipping cost may be deducted from any returned order that received free or shared shipping when the order was placed.
- Returned items that do not meet return requirements may be denied a refund or exchange.
SuperATV - 10%
During checkout, we ask for your year, make, and model. UTV Direct is not required to verify fitment on the products selected. It is ultimately the customer’s responsibility to confirm that the products ordered are correct for their vehicle. Fitment information is listed on each product page. If you are unsure, please contact our sales team before placing your order.
Refund timing may vary. You should generally expect to receive your refund within four weeks of giving your package to the return shipper, although many refunds are completed more quickly. This time period includes return transit time, inspection/processing time, and bank/payment processing time.
View Full Shipping & Returns Policy
Return authorization emails are typically sent within 2 business days. Please check all email folders, including spam and promotions folders.
California Prop 65 Warning
Kawasaki KRX 1000 Atlas Pro 1.5" Forward Offset A-Arms
Honda Talon 1000X Atlas Pro 1.5" Forward Offset A-Arms
