Free ShippingFITMENT:
- Kawasaki Mule Pro DX : 2016+
- Kawasaki Mule Pro DXT : 2016+
- Kawasaki Mule Pro FX : 2016-2023
- Kawasaki Mule Pro FXR : 2018-2023
- Kawasaki Mule Pro FXT : 2015-2023
- Kawasaki Mule Pro FXT Ranch Edition : 2016-2023
Wheel Requirements:
- 14” or larger wheel required
- Cannot exceed 5” backspacing
- Not compatible with dual beadlock wheels
- Wheels need to have a center hole of at least 3.25" (82.55mm) or require a 1” wheel spacer
FEATURES:
- Available with billet or cast aluminum housing
- Cool, quiet, precision ground gears made from 9310 alloy billet steel
- Increases width by 4 in. per side (8 in. total)
- 1.5 in. diameter 4340 hardened steel drive shaft
- No leak bearings and seals
- Universal hub fits all major bolt patterns
- Comes complete with all hardware, backing plates, brake lines, and instructions
Gen 3 Portals are Geared for All
SuperATV’s GDP 4” Portal Gear Lift for the Kawasaki Mule Pro is geared for all. What do we mean by that? Our 4” portal lift is available with 15% or 30% gear reductions. You get the gear reduction you need for the ride you want.
Perfect for Mud
Get a 30% gear reduction and start muddin’. With a massive boost to torque, you can turn bigger tires that chew through the thickest bounty holes. When you gear down and go big, your machine will turn into a mud monster. Plus, with a 30% gear reduction you can still use it on the road and tear up trails and rocks.
Perfect for Rocks
Put 4” portals and a 30% gear reduction on your machine and get the torque you need to crawl over rocks like they’re not even there. You’ll have the clearance to get over anything without scratching up your skid plate, and you’ll have room to run bigger tires. These portals are built for boulders.
Perfect for Farming
Get 4” portals and a 15% gear reduction on your Mule. You’ll have clearance to get over brush, sticks, and debris without issue. Plus, you’ll have the gear reduction to push through ruts and ditches easily all while towing a trailer full of tools. You’ll still have enough speed to cruise down the road between fields.
Perfect for Trails
Get 4” portals and a 15% gear reduction on your machine and blaze a new trail. You’ll keep that high speed and leave your friends in the dust when you hit a hill or dirt shelf. A little lift and a little extra torque will bring out your machine’s true potential.
Better Gears
Our gears are precision ground and made with 9310 billet steel alloy for high strength and high speed. That means they’re cool and quiet even when you’re hammering down the throttle on the road, and they have strength to withstand every ride.
Stronger Housings by Design
Trust us when we say we’ve done our research. We’ve seen what makes housings fail—you know, those designs and materials that give off a “what not to do” vibe. And we do the opposite of that. Our housings are stronger, smarter, and more dependable by design. Whether you go with cast or our USA-made and CNC-machined 6061 billet aluminum, you’re getting portal housings that offer unmatched strength and reliability.
- Our housings are reinforced in all the right places
- They’re built with better oil flow and gearing forces in mind
- There are no gimmicks and no vents because vents do more harm than good—we know because we tested them
Advanced Gaskets and Seals
Whether you go with cast or billet, both housings use:
- Advanced gaskets with excellent oil resistance and a lower deterioration rate than Kevlar gaskets
- A sealed input gear and double-lipped output seal
- 100% sealing coverage throughout so you can forget about oil leaks
Top-Rated Customer Service
Still need a little help getting exactly what you need? We’ve got a dedicated team just for portal support. Give us a call so we can get the perfect set of portals in your hands today.
| Kawasaki Mule Pro Portal Gear Reduction Recommendations | ||
|---|---|---|
| Tire Size | Required Suspension Setup with 4" Portals | Recommended 4" Portal Gear Reduction |
| Up to 27" | Stock | 15% |
| 28" | 2" Lift Kit | 15% |
| Up to 27" | 1.5" Forward Front A-Arms | 15% |
| 28" to 30" | 1.5" Forward Front A-Arms and 1.5" Offset Rear A-Arms | 30% |
| 28" to 30" | 1.5" Forward Front A-Arms and 1.5" Offset Rear A-Arms with 2" Lift Kit | 30% |
| Gear reductions listed are general guidelines to maintain factory top speed. Installing a larger than recommended gear reduction will result in extra torque and lower top speed. Give us a call for more information. | ||
RETURN POLICY
- Items must be returned within 30 days of receiving them
- Windshields with the protective covering removed are not returnable
- Special ordered & custom items are non-returnable
- All return expenses are the responsibility of the customer unless the incorrect part was shipped in error
- Exchanges will not be shipped until the return has been received
- A restock fee may be applicable depending on the situation/manufacturer
- RE-STOCK FEES below are the MINIMUM manufacturer charges deducted from your refund
- The Original shipping cost will be applied to any returned order that received free shipping when the order was placed
- All items must be returned in new/undamaged/uninstalled condition in original packaging
- All returns must be inspected by our team before a refund/exchange will be processed
- Returned items that do not meet these requirements may be denied a refund/exchange
SuperATV - 30%
-We ask for your year, make and model at the end of you order. We are not required to check fitment on the products that you selected. It is ultimately the customers responsibility to check fitment on all products they are ordering to make sure it will fit their vehicle. Fitment information (Year, Make and Model) are listed on each product page, if you are not sure you are always more than welcome to give us a call and speak to someone in our sales department.
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (5 to 10 business days), and the time it takes your bank to process our refund request (24 to 48 hours).
If you need to return an item(s) please CLICK HERE FOR THE RETURN REQUEST FORM.
***Return Authorization emails are sent to customer within 2 business days. Remember to check ALL EMAIL FOLDERS after 48 hours as they do not always go into your inbox, if you still do not see it please give us a call***
