Free ShippingKFI 80-inch Pro-V plow for CFMOTO UFORCE
This kit pairs KFI’s current 106820 Pro-V system with the front mount for your UFORCE. The kit includes both wings, the center pivot, Pro 2.0 push frame, standard mounting ears, markers, top flaps and your choice of wing control. A working winch is required to raise and lower the plow and is sold separately.
What comes with your kit
You get four KFI boxes plus the CFMOTO mount you select. Boxes 1–3 are included with every kit. Your wing-control choice determines what comes in Box 4.
Box 1 · Driver-side wing
KFI 106820-DS
Assembled steel wing with a replaceable poly face and tripping wear bar.
Box 2 · Passenger-side wing
KFI 106820-PS
The matching opposite wing, with the same replaceable poly face.
Box 3 · Center pivot
KFI 106820-CP
Connects the wings and includes the flap, premium markers, and the wing skid feet and brackets.
Every Box 4 includes the welded Pro 2.0 push frame, standard mounting ears and the center skid foot. The kit also includes your vehicle-specific front mount. Your existing winch raises and lowers the blade.
1. Match your CFMOTO
| Model | Year | KFI mount |
|---|---|---|
| UFORCE 1000 | 2019–2026 | 106050 |
| UFORCE 1000 XL | 2022–2026 | 106050 |
| UFORCE 600 | 2021–2026 | 106415 |
| UFORCE 800 XL | 2025–2026 | 106415 |
| UFORCE U10 PRO and U10 XL PRO | 2025–2026 | 106565 |
Check your exact year, model and trim. The U10 PRO mount also includes a lower 2-inch receiver. Measure mount pin height before ordering if you run a lift, oversized tires or tracks.
2. Choose wing control
Choose one Box 4 package. The controls below move the plow wings. A working winch is required for lifting and is sold separately.
Manual angle
KFI 106820-MP
Set each wing by hand with the included adjustment bars and pins.
Hydraulic dash switches
KFI 106820-AP
Move each wing from the cab. Includes two electric hydraulic actuators, two dash rocker switches and wiring.
Hydraulic handheld remote
KFI 106820-APH
Use the handheld remote to move the wings. Includes two electric hydraulic actuators, the remote and wiring.
3. Check your track setup
Track-equipped UTVs use the 106280 extension. Hydraulic configurations with tracks also use two ACT-EXT wiring extensions.
Blade size and construction
The blade measures 80 inches straight, 75 inches in V and 72 inches in scoop. A replaceable poly face covers the steel frame, and the wear bar trips on impact. Built-in height adjustment spans 1 inch up or down.
See the 106820 blade and trip edge
Current 106820 wing positions: straight, V and scoop.
Current 106820 blade in its resting position.
Current 106820 view with the trip edge released.The plow weighs about 290 lb. The blade face is about 21 inches tall and about 28 inches with the flap. KFI lists a two-year limited warranty.
Installation manuals
Pro‑V assembly instructions (PDF, opens in a new tab)
Dash switch wiring (PDF, opens in a new tab)
Handheld remote wiring (PDF, opens in a new tab)
See the earlier Pro‑V in action
These photos and videos from our original listing show the earlier 106180 on other UTVs. They illustrate blade positions and hydraulic operation. For current kit contents, CFMOTO fitment and installation, use the 106820 details and manuals on this page.
Earlier Pro‑V mounted on a Kawasaki RIDGE.
Another view of the earlier Pro‑V on a Kawasaki RIDGE.
Earlier Pro‑V example from the original UTV Direct listing.
Earlier Pro‑V example from the original UTV Direct listing.KFI Pro‑V plow overview
UTV Direct hydraulic operation demo
UTV Direct Return Policy
Eligible items may be returned within 30 days of receiving your order. All returns must be submitted through the UTV Returns Center and are subject to inspection before a refund or exchange is processed.
- Items must be returned within 30 days of receiving them.
- Items must be returned in new, undamaged, uninstalled condition and in the original packaging.
- Windshields with the protective covering removed are not returnable.
- Special-order and custom items are non-returnable.
- Return shipping expenses are the responsibility of the customer unless UTV Direct shipped the incorrect item in error.
- Exchanges will not be shipped until the return has been received and inspected.
- The original shipping cost may be deducted from any returned order that received free or shared shipping when the order was placed.
- Returned items that do not meet return requirements may be denied a refund or exchange.
During checkout, we ask for your year, make, and model. UTV Direct is not required to verify fitment on the products selected. It is ultimately the customer’s responsibility to confirm that the products ordered are correct for their vehicle. Fitment information is listed on each product page. If you are unsure, please contact our sales team before placing your order.
Refund timing may vary. You should generally expect to receive your refund within four weeks of giving your package to the return shipper, although many refunds are completed more quickly. This time period includes return transit time, inspection/processing time, and bank/payment processing time.
View Full Shipping & Returns Policy
Return authorization emails are typically sent within 2 business days. Please check all email folders, including spam and promotions folders.
California Prop 65 Warning
