Free ShippingKFI snow plow kit for Yamaha RMAX
Choose your RMAX model and year, then select a blade, winch setup and accessories. Your vehicle selection determines the included plow mount. Review the kit total and component list before ordering.
Blade size guide · Common questions · Shipping & support
Quality built for winter work
Clear driveways, farm lanes and work areas with a KFI plow system built around sturdy materials and serviceable components. The selected blade, Pro 2.0 push tubes and vehicle-specific mount work together as a complete snow-clearing setup for your RMAX.
- A strong backbone: Pro 2.0 push tubes use heavy-duty 1½-inch, 12-gauge square steel tubing and ¼-inch Grade 50 steel pivot bushings.
- Reinforced blade construction: Pro-S blades use 11-gauge steel. Pro-Poly blades combine a flexible poly face with 3/16-inch Grade 50 steel ribs and frame.
- A durable finish: KFI bead-blasts the steel components before powder coating to prepare the surface for a lasting finish.
- Built to maintain: Both blade families feature two-sided Grade 50 steel wear bars secured with Grade 8 bolts, plus fully adjustable skids. Serviceable wear parts help keep the plow working season after season.
The Pro 2.0 push tubes and both KFI blade families are made in the USA.
What comes in the base kit?
- KFI Pro 2.0 UTV push tubes — 106300
- KFI RMAX plow mount 106240 and required leveling kit 106322
- Your selected 60-, 66- or 72-inch steel or poly blade
A winch is required to lift the plow. Use your installed compatible winch or add a KFI Assault AS-50WX 5000 lb wide synthetic-rope winch. KFI lists an OEM integrated wide mount for the RMAX; no separate mounting plate is needed or charged. Confirm existing winch, fairlead and auto-stop suitability for plowing. Follow wiring and line-routing instructions; any installation-specific extensions are extra.
Which blade should I choose?
Choose width for your machine, then choose material. Measure the outside of your tires and allow for reduced coverage when the blade is angled. A wider blade is not automatically the right fit for every machine.
- Steel: 16-inch blade face. The 66- and 72-inch versions include a rubber top flap; the 60-inch version does not.
- Poly: 21-inch blade face with a rubber top flap and blade markers included in all three sizes. Compare the listed weights: poly does not necessarily mean lighter.
- Both use a steel wear bar. A poly blade face is not a rubber cutting edge. For gravel, adjust the skid shoes and cutting-edge clearance following KFI’s instructions.
| Blade / SKU | Width | Face height | Height with included flap | Blade weight |
|---|---|---|---|---|
| Steel 60″ · 105060 | 60″ | 16″ | Flap not included | 75 lb |
| Steel 66″ · 105066 | 66″ | 16″ | Approx. 21″ | 81 lb |
| Steel 72″ · 105072 | 72″ | 16″ | Approx. 21″ | 85 lb |
| Poly 60″ · 105860 | 60″ | 21″ | Approx. 27″ | 81 lb |
| Poly 66″ · 105866 | 66″ | 21″ | Approx. 27″ | 82 lb |
| Poly 72″ · 105872 | 72″ | 21″ | Approx. 27″ | 87 lb |
Face height excludes the top flap. Flap heights are approximate and exclude skid shoes and blade markers. Weights are for the blade, not the complete kit. Source: KFI Pro-S steel and KFI Pro-Poly, checked October 24, 2026.
RMAX fitment & installation
All listed configurations include mount 106240 and the required 106322 leveling kit, supplied once. Stock factory configurations only; aftermarket bumpers, lifts, tires, tracks and forward A-arms require confirmation.
| Yamaha model | Years |
|---|---|
| Wolverine RMAX2 1000 | 2021–2026 |
| Wolverine RMAX4 1000 | 2021–2024 |
| Wolverine RMAX4 1000 COMPACT | 2025–2026 |
| Wolverine RMAX4 1000 (Dump Bed) | 2025–2026 |
For 2025–2026 four-seat models, select COMPACT or Dump Bed explicitly. Unlisted models and years are not offered.
106240 RMAX mount instructions (PDF · new tab) ↗
Required 106322 leveling kit instructions (PDF · new tab) ↗
KFI Yamaha winch fitment chart ↗
Optional upgrades: choose only what you need
- Plow strap: an accessory for winch-powered plow lifting.
- Blade markers: help you see the ends of a steel blade. Poly blades already include markers.
- Power-angle kit: adjusts the blade angle from inside the cab; a winch still raises and lowers the blade.
- Leveling kit: KFI 106322 is required and included; do not add another kit.
- Side shields: choose an option matched to your blade material.
Common questions
Do I need to buy another winch?
Keep a compatible installed winch for no added charge. Otherwise choose the Assault AS-50WX wide synthetic-rope winch. It uses the RMAX OEM integrated wide mount; no separate mounting plate is needed or charged. Check your fairlead and electrical installation before ordering.
Is the poly blade lighter or safer for my driveway?
Compare the actual blade weights in the size guide; poly is not automatically lighter. Both blade types use a steel wear bar. For gravel or delicate surfaces, the cutting edge, skid adjustment and surface conditions matter. Contact us if you need help choosing the setup.
What size blade should I choose?
Choose a blade that suits your machine’s width, size, weight and power. It should cover both tire tracks at your working angle while keeping the blade weight and snow load manageable for your machine.
As a general blade-sizing guideline, we do not recommend a 72-inch blade for smaller machines such as the Polaris Ranger 500 or Honda Pioneer 500/520. These smaller machines can struggle with the larger blade and the snow it pushes, especially in deep or wet snow. A wider blade is not automatically a better choice.
KFI lists left or right angling up to 25 degrees. Angling the blade reduces the width of the plow path, so the clearing width is less than the blade’s advertised straight-across width. At 25 degrees, a 60-inch blade clears approximately 54.4 inches, a 66-inch blade approximately 59.8 inches, and a 72-inch blade approximately 65.3 inches. These are geometric estimates (blade width × cosine of the angle), not guaranteed clearance measurements. Measure across the outside of your tires and allow enough overlap to keep both tire tracks in the cleared path. Tire size, blade position and vehicle modifications can affect the clearance you need. The standard system uses a release pin to change the angle; the optional power-angle kit moves it from the cab.
Can I remove the plow when I am not using it?
The push tubes attach to the vehicle’s plow mount using hitch pins and retaining clips. Follow KFI’s instructions to support and detach the blade/push-tube assembly and disconnect the lifting line. The vehicle-specific mount can remain installed as directed by its instructions.
What must I check before installation?
Read the 106240 and 106322 manuals, verify your factory configuration and check the winch-line lifting angle. The required leveling kit is already included.
Shipping & help after purchase
Blade, push tubes and accessories may ship in separate packages or from different warehouses. Availability and dispatch times can vary during snow season; contact us for a current estimate if you need the kit by a particular date.
For Canada, Alaska or Hawaii, request a shipping quote. See our shipping and returns policy before ordering.
Call 888-716-1660 with your model, year and winch details for selection or installation help. Keep your blade and mount SKUs for future service; shop plow replacement parts and accessories.
Plow angle & width visualizer
KFI plow angle & width visualizer
See how angling the blade narrows the path it clears. Measure across the outside edges of your tires, including wheel offset. The default tire width is 64 inches; enter your actual measurement.
KFI’s Pro 2.0 push tubes have three blade positions: straight, 25° left and 25° right. Use this tool to compare widths, then choose your blade in the Plow Builder.
1.3″ total geometric clearance. Allow for real-world turning and snow conditions.
Estimated clearing width = blade width × cos(working angle). This illustrative top view explains width geometry; it does not establish vehicle fitment or installation clearance. Blade shape, tire size and setup affect actual results.
UTV Direct Return Policy
Eligible items may be returned within 30 days of receiving your order. All returns must be submitted through the UTV Returns Center and are subject to inspection before a refund or exchange is processed.
- Items must be returned within 30 days of receiving them.
- Items must be returned in new, undamaged, uninstalled condition and in the original packaging.
- Windshields with the protective covering removed are not returnable.
- Special-order and custom items are non-returnable.
- Return shipping expenses are the responsibility of the customer unless UTV Direct shipped the incorrect item in error.
- Exchanges will not be shipped until the return has been received and inspected.
- The original shipping cost may be deducted from any returned order that received free or shared shipping when the order was placed.
- Returned items that do not meet return requirements may be denied a refund or exchange.
During checkout, we ask for your year, make, and model. UTV Direct is not required to verify fitment on the products selected. It is ultimately the customer’s responsibility to confirm that the products ordered are correct for their vehicle. Fitment information is listed on each product page. If you are unsure, please contact our sales team before placing your order.
Refund timing may vary. You should generally expect to receive your refund within four weeks of giving your package to the return shipper, although many refunds are completed more quickly. This time period includes return transit time, inspection/processing time, and bank/payment processing time.
View Full Shipping & Returns Policy
Return authorization emails are typically sent within 2 business days. Please check all email folders, including spam and promotions folders.
