Free ShippingFITMENT:
- Polaris General XP 1000 : 2020+
- Polaris General XP 1000-4 : 2022+
FEATURES:
- Adjustable heat-treated collars for camber adjustability with a 1” thread
- Raked forward 1.5"
- Over 3 degrees of camber adjustment in each direction
- Heavy duty ball joint brackets to eliminate deformation issues, High Lifter HD Ball Joint Compatible
- Ladder bar compatible with the 1.5” ID clamps
- Extreme duty 1.5” x .120” DOM steel construction
- Up to 1.75” of added ground clearance compared to OEM lower arm
- Utilizes High Lifter’s new brake line clamps for securing brake lines to control arms
- Optimized sway bar linkage angles
- Includes upgraded heavy duty inner and outer tie rods with heim joints and alignment cones.
- Limited Lifetime Warranty (Excludes wearable items like bushings, bearings, cones, and heim joints)
- Powder Coated
Heavy Duty Strength
High Lifter’s new heavy duty control arms add more support than factory. The upper control arms that come stock on a Polaris General 1000 XP are more robust than the stock lower control arms, leaving the lower arms more vulnerable to damage. Our upper and lower arms are made with the same material for added strength, so they can withstand the abuse applied during a typical ride. High Lifter arms are constructed out of 1.5” DOM with .120 wall tubing. This is a 50% increase in size and a 70% increase in steel thickness for added durability and strength.
Built in Adjustability
The lower arms also feature an adjustability component in the bushing collars to eliminate premature wearing that can come from the addition of lift kits, portals, or larger tires. When the kit is set to the factory position, you have 3/8” of adjustability camber in and out. Heat treated and plated adjustable bushing collars allow you to be confident in the strength you’re adding to your ride. This kit comes packaged and preadjusted to the factory position, and factory bushings and caps should be used for installation.
Increased Ground Clearance
We maximized ground clearance by strategically arching the lower control arm with double and TRIPLE bends. This unique design allowed us to get an additional 1.75” of ground clearance to avoid impacting those nasty trail obstacles. These bends maintain the factory geometry, which helps reduce wear on components like axles and tie rods. Our forward arms allow you to run larger tires without a suspension lift. We’ve improved the upper control arm by repositioning the sway bar tab. This will reduce the extreme angles places on the sway bar links and reduce wear.
Reinforced Ball Joints Brackets
Portals and large tires apply torque that can distort the ball joint bracket, leading to failure of the arms. With over 130% increase in the ball joint mounting area, we are helping to prevent breakdown or “egging” of the mounting bracket.
UTV Direct Return Policy
Eligible items may be returned within 30 days of receiving your order. All returns must be submitted through the UTV Returns Center and are subject to inspection before a refund or exchange is processed.
- Items must be returned within 30 days of receiving them.
- Items must be returned in new, undamaged, uninstalled condition and in the original packaging.
- Windshields with the protective covering removed are not returnable.
- Special-order and custom items are non-returnable.
- Return shipping expenses are the responsibility of the customer unless UTV Direct shipped the incorrect item in error.
- Exchanges will not be shipped until the return has been received and inspected.
- The original shipping cost may be deducted from any returned order that received free or shared shipping when the order was placed.
- Returned items that do not meet return requirements may be denied a refund or exchange.
High Lifter - 20%
During checkout, we ask for your year, make, and model. UTV Direct is not required to verify fitment on the products selected. It is ultimately the customer’s responsibility to confirm that the products ordered are correct for their vehicle. Fitment information is listed on each product page. If you are unsure, please contact our sales team before placing your order.
Refund timing may vary. You should generally expect to receive your refund within four weeks of giving your package to the return shipper, although many refunds are completed more quickly. This time period includes return transit time, inspection/processing time, and bank/payment processing time.
View Full Shipping & Returns Policy
Return authorization emails are typically sent within 2 business days. Please check all email folders, including spam and promotions folders.
California Prop 65 Warning
