Free ShippingFITMENT:
- 2016 Can-Am Defender 1000
- 2017 Can-Am Defender 1000
- 2016 Can-Am Defender 1000 DPS
- 2017 Can-Am Defender 1000 DPS
- 2016 Can-Am Defender 1000 XT
- 2017 Can-Am Defender 1000 XT
- 2017 Can-Am Defender 800 BASE
- 2016 Can-Am Defender 800R
- 2017 Can-Am Defender 800R
- 2016 Can-Am Defender 800R DPS
- 2017 Can-Am Defender 800R DPS
- 2016 Can-Am Defender 800R XT
- 2017 Can-Am Defender 800R XT
- 2017 Can-Am Defender MAX 1000 DPS
- 2017 Can-Am Defender MAX 1000 XT
- 2017 Can-Am Defender MAX 800 DPS
- 2017 Can-Am Defender MAX 800 XT
- 2019 Can-Am Defender HD10 DPS
- 2019 Can-Am Defender HD10 XT
- 2019 Can-Am Defender HD10 XTP
- 2019 Can-Am Defender HD8
- 2019 Can-Am Defender HD8 DPS
- 2019 Can-Am Defender HD8 XT
- 2019 Can-Am Defender MAX HD10 DPS
- 2019 Can-Am Defender MAX HD10 XT
- 2019 Can-Am Defender MAX HD10 Lone Star
- 2019 Can-Am Defender MAX HD8 DPS
- 2019 Can-Am Defender MAX HD8 XT
- 2019 Can-Am Defender MAX HD8
THIS WILL NOT FIT A 2020 OR NEWER CAN-AM DEFENDERS
Note: Does not work on CAB models or units with a back glass.
There are no returns or refunds on any brand of snorkel.
FEATURES:
- Custom powder coated riser bracket to keep risers straight, evenly spaced, and looking good
- Rubber grommets to hold riser tubes in place
- 1 ½”, 2” or 3” risers - based on specific model
- Heavy-duty vinyl tubing to route difficult locations, whereas the competition uses think tubing
- High heat silicon hose in those critical areas where the competition melts
- Bellows to keep water out of differentials and transmission
- All mounting hardware for complete installation
- Step-by-step instructions complete with detailed photos
- Note: You have to cut/trim some plastic to install this kit.
BENEFITS:
- Provides clean, dry air to the engine and other parts needing venting
- Prevents mud, water, and debris from entering the engine and clutch housings when equipped
- Bellows allow the differential and transmission air to expand and contract without the need for long vent lines that can easily get plugged with mud or be pulled off
- Each kit is engineered and cut to fit your specific application
FAQ:
Why Snorkel?
Simply put – The right snorkel can be the best insurance you buy for your UTV. The right snorkel can protect you expensive investment from disaster when submerged deeper than OE rated water depth. On the other hand, the wrong snorkel can be your worst investment and nightmare.
How could that happen?
Snorkels leak for a variety of reasons. Installation errors account for a lot these. Many times a do-it-yourselfer may get it right, but only for a short time. When pipes aren’t cut to correct length and things don’t line up quite right, many times the snorkel will prevent water, but only for a limited time, and then the joint fails. One of the most common issues that we’ve seen is failure due to a heat source. When the snorkel runs close to heat source, the snorkel material deteriorates during each ride. The material gets harder and more brittle, and many times begins to deform. At some point, the material cracks and begins to let mud and water in. Less expensive kits rarely provide the heat resistant material to account for this. Our goal is to avoid these areas. This can take more time and more material, but goes a long way to extending the life of the snorkel and the UTV.
What does a Snorkel do?
A Snorkel Kit is intended to provide clean, dry air to the engine and other parts needing venting, such as clutches, differentials, transmission, carburetors, and fuel tanks. This doesn’t necessarily mean the vehicle should exceed the OE manufacturer’s stated maximum rated water line depth. The Snorkel Kit is intended as an additional margin of protection in the event that the vehicle is inadvertently driven into water deeper than the OE manufacturer’s air intakes will tolerate. There are many considerations to make when increasing water line depth, and a snorkel is just one component.
DESCRIPTION:
High Lifter makes the highest quality and most comprehensive Snorkel Kit in the UTV industry. Our High Lifter Snorkels are the best looking and most professional appearing kits on the market. From fit to finish, to the level of detail, our kits are not only built to work, they are built to look good while doing it.
UTV Direct Return Policy
Eligible items may be returned within 30 days of receiving your order. All returns must be submitted through the UTV Returns Center and are subject to inspection before a refund or exchange is processed.
- Items must be returned within 30 days of receiving them.
- Items must be returned in new, undamaged, uninstalled condition and in the original packaging.
- Windshields with the protective covering removed are not returnable.
- Special-order and custom items are non-returnable.
- Return shipping expenses are the responsibility of the customer unless UTV Direct shipped the incorrect item in error.
- Exchanges will not be shipped until the return has been received and inspected.
- The original shipping cost may be deducted from any returned order that received free or shared shipping when the order was placed.
- Returned items that do not meet return requirements may be denied a refund or exchange.
High Lifter - 20%
During checkout, we ask for your year, make, and model. UTV Direct is not required to verify fitment on the products selected. It is ultimately the customer’s responsibility to confirm that the products ordered are correct for their vehicle. Fitment information is listed on each product page. If you are unsure, please contact our sales team before placing your order.
Refund timing may vary. You should generally expect to receive your refund within four weeks of giving your package to the return shipper, although many refunds are completed more quickly. This time period includes return transit time, inspection/processing time, and bank/payment processing time.
View Full Shipping & Returns Policy
Return authorization emails are typically sent within 2 business days. Please check all email folders, including spam and promotions folders.
