Free ShippingKFI Snow Plow Kit for Tracker UTV
Choose your supported Tracker, then a 60-, 66- or 72-inch steel or poly blade. Every kit includes KFI Pro 2.0 square push tubes 106300 and your model-matched front plow mount. A working winch is required to lift the blade; use yours or select a confirmed added-winch package.
What comes in the base kit?
- KFI Pro 2.0 UTV push tubes — 106300.
- Your matched Tracker plow mount with installation hardware.
- Your selected steel or poly blade. Poly blades include markers and a rubber top flap.
Vehicle fitment, grouped by mount
2020–2022 Tracker 500S — KFI 106790 + required 101370 bracketThe vehicle package includes plow mount 106790 and required winch/fairlead bracket 101370 once, even if you use an existing winch. KFI lists both 105920 and 106790 for this model; this kit uses 106790 to keep selection simple. Installation requires drilling and may require fascia trimming. Wide winches are not compatible with this plow setup.
Mount 106790 installation (PDF ↗)opens in a new tabRequired bracket 101370 installation (PDF ↗)opens in a new tab2020–2025 Tracker 800SX / Crew; 2021–2025 LE / LE Crew — KFI 106000Plow mount 106000 includes a lower 2-inch receiver. LE and LE Crew require revision C; their brush guard may interfere. Confirm guard clearance before ordering. Standard 800SX and Crew offer added-winch packages with 101670; LE models use your installed winch until added-winch fitment is confirmed.
Mount 106000 revision C installation (PDF ↗)opens in a new tab2020 Tracker SVX1000 — KFI 105815The stock front bumper is required. Use your suitable installed winch; call to confirm any replacement-winch fitment.
Mount 105815 installation (PDF ↗)opens in a new tabNot offered: XTR1000, Tracker ATV models or any year/model outside this chart. A winch mount alone does not confirm plow fitment. Lifts, larger tires, tracks, forward A-arms and aftermarket bumpers require confirmation.
Winch setup and lift geometry
A winch is required to lift the blade. Added 3500 lb packages include the UTV-DRS-K dash switch kit; its $42.50 price is included. Added 800SX/Crew packages include 101670 mounting hardware; Crew packages also include UTV-WEK wiring extensions. Existing mounting hardware is not charged twice within the package. Check fairlead, rope/cable routing and electrical instructions for your installation.
KFI marks 500S for a pulley matched to the winch line: 106680 for standard steel cable or 106745 for standard synthetic rope. This optional control defaults to No pulley and is separate from the standalone 811000 seasonal plow strap. No blanket 106140 strap-roller recommendation is made. Follow KFI’s fairlead instructions; synthetic winches may need a suitable synthetic roller fairlead rather than a hawse. Installation-specific fairlead conversions are not included.
Optional upgrades
- 811000 plow strap: standalone seasonal lifting strap, separate from cable/rope pulleys.
- Power-angle actuator: adjusts blade angle from the cab. Manual angling requires stopping, exiting the cab and releasing the angle lock. The winch still raises and lowers the blade.
- 106322 leveling kit: optional for confirmed geometry with small lifts or oversized tires; check KFI mounting-height guidance.
- Markers and side shields: markers already come with poly blades. Choose shields for your blade material.
Installation PDF downloads
Pro 2.0 push tubes 106300 (PDF ↗)opens in a new tab800SX winch mount 101670 installation (PDF ↗)opens in a new tab1–2-inch leveling kit 106322 (PDF ↗)opens in a new tabCommon questions
Is the 500S bracket optional?No. KFI requires 101370 for this plow mount. It is included once with your 500S vehicle selection, even with an existing winch.
Are markers included?Yes with poly blades; optional with steel blades.
How do I choose a blade width?Measure outside tire width and compare it with angled clearing width in the KFI visualizer. Replace the default 64-inch value with your measurement.
Plow angle & width visualizer
KFI plow angle & width visualizer
See how angling the blade narrows the path it clears. Measure across the outside edges of your tires, including wheel offset. The default tire width is 64 inches; enter your actual measurement.
KFI’s Pro 2.0 push tubes have three blade positions: straight, 25° left and 25° right. Use this tool to compare widths, then choose your blade in the Plow Builder.
1.3″ total geometric clearance. Allow for real-world turning and snow conditions.
Estimated clearing width = blade width × cos(working angle). This illustrative top view explains width geometry; it does not establish vehicle fitment or installation clearance. Blade shape, tire size and setup affect actual results.
UTV Direct Return Policy
Eligible items may be returned within 30 days of receiving your order. All returns must be submitted through the UTV Returns Center and are subject to inspection before a refund or exchange is processed.
- Items must be returned within 30 days of receiving them.
- Items must be returned in new, undamaged, uninstalled condition and in the original packaging.
- Windshields with the protective covering removed are not returnable.
- Special-order and custom items are non-returnable.
- Return shipping expenses are the responsibility of the customer unless UTV Direct shipped the incorrect item in error.
- Exchanges will not be shipped until the return has been received and inspected.
- The original shipping cost may be deducted from any returned order that received free or shared shipping when the order was placed.
- Returned items that do not meet return requirements may be denied a refund or exchange.
During checkout, we ask for your year, make, and model. UTV Direct is not required to verify fitment on the products selected. It is ultimately the customer’s responsibility to confirm that the products ordered are correct for their vehicle. Fitment information is listed on each product page. If you are unsure, please contact our sales team before placing your order.
Refund timing may vary. You should generally expect to receive your refund within four weeks of giving your package to the return shipper, although many refunds are completed more quickly. This time period includes return transit time, inspection/processing time, and bank/payment processing time.
View Full Shipping & Returns Policy
Return authorization emails are typically sent within 2 business days. Please check all email folders, including spam and promotions folders.
