Polaris General 1000 RackBoss Heavy Duty Rack & Pinion

FITMENT

Polaris General 1000 (2016+)
Polaris General 1000-4 (2016+)
Will NOT fit 2020+ Polaris General XP models

Replaces OEM Part # 1823994, 1824349

FEATURES

RackBoss 2.0 Features:

Heavy-duty dual PTFE bushings:

Designed with X24 Tech
Prevents wear
Reduces slop
Improves overall durability

Solid steel tie rods use:

3/4” outer tie rod ends
Rebuildable inner tie rod ends that use 3/4” rod threads and 16 mm rack threads

Swaged tube tie rods use:

14 mm outer tie rod ends
Rebuildable inner tie rod ends that use 14 mm rod threads and 16 mm rack threads

65% larger housing than stock
Over 50% less wear than OEM after 15,000 cycles
Grease fitting for rack gears

RackBoss 2.0 Is More Durable

Your Polaris General likes to throw its weight around, but keeping the beast under control wears out your steering rack. Eventually your steering becomes less responsive, and there’s nothing you can do to stop it. That’s where RackBoss 2.0 comes in. It’s built differently with our X24 Tech—a unique dual-bushing design you can’t get anywhere else. So install SuperATV’s RackBoss 2.0 Rack and Pinion on your Polaris General 1000. With it, you can run bigger tires, take on treacherous terrain, and ride with confidence everywhere you go. With 50% less wear than stock, your steering won’t get sloppy any time soon.

Minimizes Wear and Tear with Our Dual-Bushing Design
We use a dual PTFE bushing design to prevent the wear and tear that you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without getting sloppy steering. You get like-new operation that lasts longer than any other General 1000 steering rack. Plus, the built-in grease fittings allow you to push out all the crud that can get in when you go hard in mud or water. It’s only possible with RackBoss 2.0.

Solid Steel Bar Tie Rods
Solid steel bar tie rods give you the robust strength you need to ride through rough terrain. They’re perfect for turning big tires through slop and navigating boulder fields. The 1” diameter steel rod is paired with beefy tie rod ends—3/4” outer tie rods and rebuildable inner tie rods that use 3/4” rod threads and 16 mm rack threads. All that strength lets you get wild.

Looking for a More Traditional Rack?
If you don’t need all the benefits of a RackBoss 2.0, you can dial it back to our original, more traditional RackBoss 1.0. It uses the same beefy housing but doesn’t include the extra PTFE bushing. Our RackBoss 1.0 Rack and Pinion comes with steel swaged tubes that are tougher than stock and perfect for casual riders looking for an upgrade. It’s finished with our tough 14 mm inner and outer tie rod ends so you can ride harder without worry.

UTV Direct Return Policy

Eligible items may be returned within 30 days of receiving your order. All returns must be submitted through the UTV Returns Center and are subject to inspection before a refund or exchange is processed.

Items must be returned within 30 days of receiving them.
Items must be returned in new, undamaged, uninstalled condition and in the original packaging.
Windshields with the protective covering removed are not returnable.
Special-order and custom items are non-returnable.
Return shipping expenses are the responsibility of the customer unless UTV Direct shipped the incorrect item in error.
Exchanges will not be shipped until the return has been received and inspected.
The original shipping cost may be deducted from any returned order that received free or shared shipping when the order was placed.
Returned items that do not meet return requirements may be denied a refund or exchange.

Restocking fees: A restocking fee may apply depending on the item condition, situation, or manufacturer. The restocking fees below are the minimum manufacturer charges deducted from your refund when applicable.

SuperATV - 10%

Before returning an item: Please submit a return request and wait for return instructions. Do not ship items back without return authorization.

During checkout, we ask for your year, make, and model. UTV Direct is not required to verify fitment on the products selected. It is ultimately the customer’s responsibility to confirm that the products ordered are correct for their vehicle. Fitment information is listed on each product page. If you are unsure, please contact our sales team before placing your order.

Refund timing may vary. You should generally expect to receive your refund within four weeks of giving your package to the return shipper, although many refunds are completed more quickly. This time period includes return transit time, inspection/processing time, and bank/payment processing time.

Start a Return Request

Check Return Status

View Full Shipping & Returns Policy

Return authorization emails are typically sent within 2 business days. Please check all email folders, including spam and promotions folders.