Free Shipping
FITMENT:
- Polaris General XP 1000 : 2020+
- Polaris General XP 4 1000 : 2020+
FEATURES:
- Heavy-duty dual PTFE bushings:
- Designed with X24 Tech
- Prevents wear
- Reduces slop
- Improves overall durability
- Available tie rod options:
- Solid steel bar
- Swaged tube
- Swaged tube tie rods use:
- 14 mm outer tie rod ends
- Rebuildable inner tie rod ends that use 14 mm rod threads and 16 mm rack threads
- Solid steel tie rods use:65% larger housing than stock
- 3/4” outer tie rod ends
- Rebuildable inner tie rod ends that use 3/4” rod threads and 16 mm rack threads
- Over 50% less wear than OEM after 15,000 cycles
- Grease fitting for rack gears
It Doesn’t Get Any Better than RackBoss 2.0
You can use your Polaris General for every kind of job and take it on every adventure. That means that your stock steering rack is gonna wear out and make your handling feel loose eventually. That’s why you need our RackBoss 2.0 Rack and Pinion on your Polaris General XP 1000. It’s a better rack that’s designed to outlast everything else on the market thanks to our X24 Technology. Our design reduces wear by over 50% so you can ride all you want, even with massive tires. Your steering will be tight and responsive for years and years.
Your General XP 1000 Needs X24 Tech
Our X24 Tech takes our General XP 1000 RackBoss 2.0 to the next level. It’s a dual-bushing design that uses PTFE bushings at both ends of the rack to reduce movement in the gearset and tension spring. The result is up to 50% less wear and tear on the rack and tighter handling—no more shaky steering. Plus, it’s greaseable, so you can keep it clean and lubricated.
Solid Steel Bar Tie Rods
Our 1” diameter steel bar tie rods give your General XP 1000’s steering rack the strength it needs to go hard. Whether you’re hauling big loads or navigating nasty washouts with massive tires, you can count on them to hold strong. The rods are paired with beefy tie rod ends that have 3/4” rod threads and 16 mm rack threads. That’s serious strength for serious riders.
Swaged Tube Tie Rods
The swaged tube tie rods are 1” in diameter, delivering impressive strength compared to OEM. Each tie rod end uses beefy heim joints with 16 mm rack threads and 14 mm rod threads for total reliability. Our swaged tube tie rods are designed to endure the most abusive rides year after year.
| RackBoss 2.0 Swaged Tie Rod | RackBoss 2.0 Solid Steel Tie Rod | |
| X24 Tech Dual-Bushing Design | ✔ | ✔ |
| Inner Ball and Socket Thread Diameter | 14 mm rod threads, 16 mm rack threads | 3/4” rod threads, 16 mm rack threads |
| Outer Tie Rod End Thread Diameter | 14 mm | 3/4” |
| Tie Rod Material | Steel tube | Solid steel bar |
| Greasable | ✔ | ✔ |
| Inner Boots | ✔ | ✔ |
| Steering Stop Kit | ✔ | ✔ |
| Misalignment Bushings, Tie Rod Studs, & Hardware | ✔ | ✔ |
RETURN POLICY
- Items must be returned within 30 days of receiving them
- Windshields with the protective covering removed are not returnable
- Special ordered & custom items are non-returnable
- All return expenses are the responsibility of the customer unless the incorrect part was shipped in error
- Exchanges will not be shipped until the return has been received
- A restock fee may be applicable depending on the situation/manufacturer
- RE-STOCK FEES below are the MINIMUM manufacturer charges deducted from your refund
- The Original shipping cost will be applied to any returned order that received free shipping when the order was placed
- All items must be returned in new/undamaged/uninstalled condition in original packaging
- All returns must be inspected by our team before a refund/exchange will be processed
- Returned items that do not meet these requirements may be denied a refund/exchange
SuperATV - 30%
-We ask for your year, make and model at the end of you order. We are not required to check fitment on the products that you selected. It is ultimately the customers responsibility to check fitment on all products they are ordering to make sure it will fit their vehicle. Fitment information (Year, Make and Model) are listed on each product page, if you are not sure you are always more than welcome to give us a call and speak to someone in our sales department.
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (5 to 10 business days), and the time it takes your bank to process our refund request (24 to 48 hours).
If you need to return an item(s) please CLICK HERE FOR THE RETURN REQUEST FORM.
***Return Authorization emails are sent to customer within 2 business days. Remember to check ALL EMAIL FOLDERS after 48 hours as they do not always go into your inbox, if you still do not see it please give us a call***
