KFI Complete Snow Plow Kit for Can-Am COMMANDER

KFI snow plow kit for Can-Am COMMANDER

Choose your COMMANDER model and year, then select a blade, winch setup and accessories. Your vehicle selection determines the included plow mount. Review the kit total and component list before ordering.

Blade size guide · Common questions · Shipping & support

Quality built for winter work

Clear driveways, farm lanes and work areas with a KFI plow system built around sturdy materials and serviceable components. The selected blade, Pro 2.0 push tubes and vehicle-specific mount work together as a complete snow-clearing setup for your COMMANDER.

• A strong backbone: Pro 2.0 push tubes use heavy-duty 1½-inch, 12-gauge square steel tubing and ¼-inch Grade 50 steel pivot bushings.
• Reinforced blade construction: Pro-S blades use 11-gauge steel. Pro-Poly blades combine a flexible poly face with 3/16-inch Grade 50 steel ribs and frame.
• A durable finish: KFI bead-blasts the steel components before powder coating to prepare the surface for a lasting finish.
• Built to maintain: Both blade families feature two-sided Grade 50 steel wear bars secured with Grade 8 bolts, plus fully adjustable skids. Serviceable wear parts help keep the plow working season after season.

The Pro 2.0 push tubes and both KFI blade families are made in the USA.

What comes in the base kit?

• KFI Pro 2.0 UTV push tubes — 106300
• A KFI plow mount matched to your selected vehicle
• Your selected 60-, 66- or 72-inch steel or poly blade

A working winch is required to lift the plow. Keep a compatible installed winch or add a KFI Assault AM-35 3500 lb steel-cable, AS-35 3500 lb synthetic-rope, AS-50X 5000 lb standard synthetic-rope or AS-50WX 5000 lb wide synthetic-rope package. Every added package includes the matched mounting hardware. Newer models require the separate support choice, charged once. UTV Direct strongly recommends our 811000 plow strap in place of the cable or rope during plow season. The plow mount is always included; the vehicle is not.

Which blade should I choose?

Choose width for your machine, then choose material. Measure the outside of your tires and allow for reduced coverage when the blade is angled. A wider blade is not automatically the right fit for every machine.

• Steel: 16-inch blade face. The 66- and 72-inch versions include a rubber top flap; the 60-inch version does not.
• Poly: 21-inch blade face with a rubber top flap and blade markers included in all three sizes. Compare the listed weights: poly does not necessarily mean lighter.
• Both use a steel wear bar. A poly blade face is not a rubber cutting edge. For gravel, adjust the skid shoes and cutting-edge clearance following KFI’s instructions.

Face height excludes the top flap. Flap heights are approximate and exclude skid shoes and blade markers. Weights are for the blade, not the complete kit. Source: KFI Pro-S steel and KFI Pro-Poly, checked October 24, 2026.

COMMANDER fitment & installation

Choose the model year and exact Commander or Commander MAX trim. We group models by the shared plow mount; required supporting parts are shown separately so you can see exactly what is included.

2021–2026 support: KFI 105980 includes a lower 2-inch receiver and requires KFI 101500 or an installed Can-Am OEM winch mount. The builder includes 101500 by default for these models; confirm the OEM choice only when keeping a suitable existing winch on that installed mount. Added Assault packages use KFI 101500, included once.

Commander X MR: the listed two-seat 2022–2026 model with stock 30-inch tires includes required leveling kit 106322 once. KFI does not mark the listed MAX X MR or XT-P rows with that automatic requirement; modified setups need fitment confirmation.

Scope: earlier Commander all-trim coverage is 2010–2020, and earlier MAX coverage is 2015–2020. Later models are limited to the listed DPS, XT, X MR and XT-P rows and years. We do not extend the current KFI chart to 2027 or unlisted trims.

Aftermarket bumpers, oversized tires, lifts, tracks and forward A-arms require fitment confirmation. Check the 12–14-inch push-tube mounting-height instructions; optional leveling parts may be needed.

Earlier-generation installation: mount 105275 requires drilling as shown in its instructions.

Installation PDF downloads

KFI Can-Am plow fitment chart ↗ · KFI Can-Am winch fitment chart ↗

Optional upgrades: choose only what you need

• Heavy-duty plow strap — 811000 (strongly recommended): replace your winch’s synthetic rope or steel cable with this strap during plow season. It provides a durable seasonal lifting setup and helps reduce wear and breakage from the repeated up-and-down motion of plowing. Choose the 811000 strap separately. Default: No roller. Add KFI 106140 only after checking the mount instructions and confirming that the low fairlead and nearby plow lift point create a shallow pull that strains the winch. Confirm your strap with KFI before selecting this option. KFI lists 106100 on the roller page. Compatibility with our 811000 strap is unconfirmed.
• Blade markers: all poly blades include markers; the extra marker kit is offered for steel blades only.
• Power-angle kit: adjusts the blade angle from inside the cab; a winch still raises and lowers the blade.
• 1–2-inch push-tube leveling kit — 106322: optional for compatible 106300 square push-tube setups with small lifts or oversized tires. Check KFI’s 12–14-inch mounting-height guidance. Where required by the selected vehicle, it is included automatically and supplied once. Not compatible with Swift-Latch Glacier adapters.
• Side shields: choose an option matched to your blade material.

Common questions

Shipping & help after purchase

Blade, push tubes and accessories may ship in separate packages or from different warehouses. Availability and dispatch times can vary during snow season; contact us for a current estimate if you need the kit by a particular date.

For Canada, Alaska or Hawaii, request a shipping quote. See our shipping and returns policy before ordering.

Call 888-716-1660 with your model, year and winch details for selection or installation help. Keep your blade and mount SKUs for future service; shop plow replacement parts and accessories.