KFI Complete Snow Plow Kit for Can-Am Maverick

KFI snow plow kit for Can-Am Maverick

Choose your exact Maverick year, family and trim, then the blade, winch and upgrades. The builder matches the plow mount and includes required leveling parts for the listed configurations. Supporting-mount choices show what is newly supplied or already installed. Review the full component summary before ordering.

Blade size guide · Common questions · Shipping & support

Quality built for winter work

Clear driveways, farm lanes and work areas with a KFI plow system built around sturdy materials and serviceable components. The selected blade, Pro 2.0 push tubes and vehicle-specific mount work together as a complete snow-clearing setup for your Maverick.

• A strong backbone: Pro 2.0 push tubes use heavy-duty 1½-inch, 12-gauge square steel tubing and ¼-inch Grade 50 steel pivot bushings.
• Reinforced blade construction: Pro-S blades use 11-gauge steel. Pro-Poly blades combine a flexible poly face with 3/16-inch Grade 50 steel ribs and frame.
• A durable finish: KFI bead-blasts the steel components before powder coating to prepare the surface for a lasting finish.
• Built to maintain: Both blade families feature two-sided Grade 50 steel wear bars secured with Grade 8 bolts, plus fully adjustable skids. Serviceable wear parts help keep the plow working season after season.

The Pro 2.0 push tubes and both KFI blade families are made in the USA.

What comes in the base kit?

• KFI Pro 2.0 UTV push tubes — 106300
• KFI plow mount matched to your selected Maverick. Required supporting mount and leveling parts are shown with your vehicle choice.
• Your selected 60-, 66- or 72-inch steel or poly blade

A working winch is required to lift the plow. Keep a compatible installed winch or add an Assault AM-35, AS-35, AS-50X or AS-50WX where KFI lists fitment. Added 3500 lb packages include UTV-DRS-K at $42.50 in their total; 5000 lb packages include the factory dash switch. Original steel-bumper packages add mount 101055. Trail/Sport and X3 packages use the separate required-support choice, supplied once. Aluminum-bumper original Mavericks need a confirmed existing lift setup; no added-winch package is offered for that bumper. UTV Direct recommends the 811000 seasonal strap. Vehicle not included.

Which blade should I choose?

Choose width for your machine, then choose material. Measure the outside of your tires and allow for reduced coverage when the blade is angled. A wider blade is not automatically the right fit for every machine.

• Steel: 16-inch blade face. The 66- and 72-inch versions include a rubber top flap; the 60-inch version does not.
• Poly: 21-inch blade face with a rubber top flap and blade markers included in all three sizes. Compare the listed weights: poly does not necessarily mean lighter.
• Both use a steel wear bar. A poly blade face is not a rubber cutting edge. For gravel, adjust the skid shoes and cutting-edge clearance following KFI’s instructions.

Face height excludes the top flap. Flap heights are approximate and exclude skid shoes and blade markers. Weights are for the blade, not the complete kit. Source: KFI Pro-S steel and KFI Pro-Poly, checked October 24, 2026.

Maverick fitment & installation

Use the exact year and trim below. Shared part numbers do not extend fitment to unlisted models. Maverick R / R MAX are not confirmed by KFI and are not offered. Original-generation MAX fitment needs separate confirmation; the builder does not infer it from X3 MAX or Sport MAX coverage.

Original Maverick: mounting requires plastic trimming and drilling. Mount 101055 fits the stock steel-tube bumper and does not fit the listed aluminum-bumper X ds / X rs Turbo configurations. For an aluminum bumper, confirm an existing compatible lift before ordering; the builder requires that confirmation.

Trail / Sport: the receiver-style plow mount requires KFI 101500 or an installed Can-Am OEM winch mount, including with an existing winch. The builder defaults to supplying 101500 once. The listed 2024–2026 Sport X RC and X MR include leveling kit 106322 once. Sport X RC also requires removing the front skid plate.

X3 / X3 MAX: requires a KFI supporting winch mount and 106322 leveling kit. The builder includes leveling automatically and defaults to supplying current mount 101955, which replaces 101520. This mounting setup cannot retain an installed front bumper; KFI’s manual also calls for removal of the factory lower bumper. Follow its instructions before ordering or installation. Choosing your installed compatible KFI support keeps your existing winch.

Added Assault winches select new matched KFI support once. Installed-support options add no extra purchased mount. Unlisted bumpers, lifts, tire sizes, forward A-arms, tracks or wiring conversions need fitment confirmation; installation-specific extras are not included.

Installation PDF downloads

KFI Can-Am plow chart ↗ · KFI Can-Am winch chart ↗

Optional upgrades: choose only what you need

• Heavy-duty plow strap — 811000 (strongly recommended): replace your winch’s synthetic rope or steel cable with this strap during plow season. It provides a durable seasonal lifting setup and helps reduce wear and breakage from the repeated up-and-down motion of plowing. Choose the 811000 strap separately. Default: No roller. Add KFI 106140 only after checking the mount instructions and confirming that the low fairlead and nearby plow lift point create a shallow pull that strains the winch. Confirm your strap with KFI before selecting this option. KFI lists 106100 on the roller page. Compatibility with our 811000 strap is unconfirmed.
• Blade markers: all poly blades include markers; the extra marker kit is offered for steel blades only.
• Power-angle kit: adjusts the blade angle from inside the cab; a winch still raises and lowers the blade.
• 1–2-inch push-tube leveling kit — 106322: optional for compatible 106300 square push-tube setups with small lifts or oversized tires. Check KFI’s 12–14-inch mounting-height guidance. Where required by the selected vehicle, it is included automatically and supplied once. Not compatible with Swift-Latch Glacier adapters.
• Side shields: choose an option matched to your blade material.

Common questions

No, if your installed winch and lift geometry are compatible with the listed plow and supporting mount. Trail/Sport and X3 still require their specified supporting hardware. Aluminum-bumper original Mavericks require a separately confirmed installed lift; added winches are not offered for that bumper.

All poly blades include markers. The builder offers the extra marker kit for steel blades only.

The optional ACT203/106305/106940 package changes blade angle from the cab. Your winch still raises and lowers the plow. Manual angling requires stopping, leaving the cab and releasing the angle lock.

Select the exact year and family shown in the three mount tables. Original, Trail/Sport and X3 use different mounts. Maverick R/R MAX and original-generation MAX are not offered without separate fitment confirmation.

Shipping & help after purchase

Blade, push tubes and accessories may ship in separate packages or from different warehouses. Availability and dispatch times can vary during snow season; contact us for a current estimate if you need the kit by a particular date.

For Canada, Alaska or Hawaii, request a shipping quote. See our shipping and returns policy before ordering.

Call 888-716-1660 with your model, year and winch details for selection or installation help. Keep your blade and mount SKUs for future service; shop plow replacement parts and accessories.